GT-5900-30D Series Outdoor UHF DTT Transmitter/Gap filler
GOSPELL’s GT-5900-OD is an outdoor UHF Digital Terrestrial Television (DTT) transmitter
Popis produktu
GOSPELL’s GT-5900-OD is an outdoor UHF Digital Terrestrial Television (DTT) transmitter, and is designed for small areas coverage and (or) gap filling application in DTT network. GT-5900-OD has combined many design concepts from our rich experience in terrestrial television broadcasting, bringing service providers a network which has superior efficiency, stability and reliability. These models support various modulation standards of digital terrestrial television, such as DVB-T/H, DVB-T2, DTMB, ATSC, ISDB-T/Tb, also it can operate in SFN mode enabling less frequency resource is used.
GT-5900-OD adopts advanced LDMOS amplifiers and has a compact structure that enables the broadcaster or network operator to have reduced site acquisition and energy cost in their DTT network. In order to minimize the attenuation of RF output power in the feeder cable, the unit can be fixed on top of the tower of the base station by a pole mounted kit that can greatly shorten the length of the feeder cable between the transmitter and the transmitting antenna. GT-5900-OD series has an aluminum alloy housing, compact size and a high protection level that can protect the electronics from heat emissions and weather. Various other forms of protection are taken into account, such as over excitation, over-current, over-temperature, lighting-proof and VSWR protections.
GT-5900-OD series supports Web/SNMP based management and maintenance for remote status monitoring and controls, this can significantly reduce management time and operating expense (OPEX). By incorporating the latest technologies of RF delay, echo cancellation, frequency shift and co-channel interference rejection, this unit can fulfill the needs for DTT coverage of SD and HD digital television programs. This is especially suitable for small-scale coverage areas with complex terrains.
- Available output power range from 1W to 300W
- Supports frequency range from 470MHz to 860MHz
- Supports pole mounted, for minimized power attenuation in feeder cable
- Single channel or broadband transmission
- Optional up to 80MHz of transmitting bandwidth within UHF span
- Supported standards: DVB-T/H, DVB-T2, DTMB, ATSC, ISDB-T/Tb
- Low power consumption with high efficient LDMOS amplifiers to reduce electricity cost for operators
- Available input signal sources: RF or fiber(optional)
- Excellent design in heat dissipation and weather-proof for long time operation in harsh environments
- Multiple protection measures: over excitation, over-current, over-temperature, lighting-proof and VSWR
- Excellent anti-interference performance thanks to its aluminum alloy housing and sealed connector design
- Extreme low group delay for DTV signal transmission
- Large and dynamic Auto Gain Control (AGC) circuit ensures stability of output power
- Modular design for convenient installation, on-site maintenance
- Local and remote management and maintenance by optional IP wired or GPRS wireless monitoring unit
Akční zboží
Novinky
-
EOC
Ethernet over coax
Toto koaxové řešení je vhodné pro menší počet zákazníků ( násobky 64 ) - je levnější než naše miniCMTS Docsis 3.0 která je vhodná pro instalace do 500 modemů. Mezi vlastnosti hlavně patří propracovaý QoS ( lze nastavit třídy až na portech modemu ), vysoká odolnost vůči rušení a hlavně možný útlum až 60 dB. Zařízení dodáváme ve venkovním i vnitřním provedení.
Námi nabízené řešení je postavené na Atherosu čipu, který přes jeden headend modem dodává reálnou rychlost 300 Mb/s . Koncové modemy jsou dodávány pouze ve verzi 100 Mb/s s reálnou rychlostí 88 Mb/s.
Na fotkách vidíte zařízení s PON modulem, ale umíme vyrobit zařízení i bez něj. S více headend modemy max. 4 kusy ( pak by se jednalo o reálnou propustnost 1200 Mb/s ), nadále je možné ho osadit na přání dálkovým napájením ať přes UTP nebo po KOAXu.
Tyto a ostatní zařízení dodáváme jako komplexní stavebnici opticko – koaxiální včetně rozsáhlého managementu. Zařízení vám po domluvě můžeme odborně namontovat a proškolit vaše techniky.
( HEADEND )
(modem s Wi-Fi )
( management )
-
SW Transcoder
Přinášíme Vám unikátní řešení transcoderu jak pro IPTV a tak i pro CATV operátory. Pokud máte nutnost provozovat HLS streamy, popř. streamy transcodovat z MPEG2 do H.264, H.265 nebo opačně tak vás toto unikátní SW řešení určitě zaujme. Samozřejmostí je nutnost pro CATV operátory funkční CBR transcoding.
Trancoder nabízíme ve třech variantách, více najdete v našem eshopu.
Ukázka transodingu HD streamu do 720p a datovém toku 2,2 Mb/s
Funkce:
■ Transcoding and transrating
■ Real-time transcoding of MPEG Transport Streams
■ Single Program Transport Stream (SPTS) to Single Program Transport Stream (SPTS)
■ IP input to IP output
■ Input: MPEG Transport Stream (MPEG-TS) with MPEG-2 Video AVC / H.264 HEVC / H.265 AAC, MPEG Audio, Dolby Digital, Dolby Digital Plus
■ Output: MPEG Transport Stream (MPEG-TS) with Transcoding / transrating or passthrough MPEG-2 Video AVC / H.264 HEVC / H.265 AAC, MPEG Audio, Dolby Digital, Dolby Digital Plus
■ Video effects Deinterlacing, scaling, frame rate conversion
■ Audio effects Volume, sample rate conversion