MIMOSA B5-LITE LINK KIT
750+ Mb/s TDMA, 1 Gb/s spoj BOD-BOD vhodný do vzdálenosti 5 Km.
Popis produktu
Introducing the B5-Lite, your next low-cost, high throughput backhaul radio. Using Mimosa’s TDMA protocol and 802.11ac technology, this 2x2:2 radio is a great option for locations that do not require collocation.
Capable of 750+ Mbps throughput, this radio can serve less bandwidth hungry areas easily. In a smaller form factor than the B5 and a 20 dBi antenna - the B5-Lite strips away a few advanced B5 features to provide you with an alternative low-cost solution.
Auto Everything
Wireless interference can change in an instant, and your network needs to adapt. The Mimosa B5-Lite offers constant spectrum analysis with historical and real-time data to dynamically make smarter decisions. The Auto Everything feature will automatically adjust frequency, channel width and power levels based on environmental feedback. This feature can be turned off for users that prefer more control.
Mimosa TDMA protocol establishes a new benchmark for PHY:MAC efficiency and spectrum re-use.
Choose between the highest possible throughput TDMA slot times (which use high packet aggregation techniques), or low latency slot times to support latency-critical vertical applications.
Stream Power Peaking- Multi-stream MIMO radios normally settle on the lowest MCS rate across all the streams, severely degrading performance. Mimosa’s backhaul radios constantly advise the remote-side radio of individual stream receive levels, increasing those signal levels to meet the highest common attainable MCS rate.
Predictive AGC- When there’s a consistent signal from a single client, Mimosa’s Automatic Gain Control narrows the gain window of the receive signal amplitude for the next incoming packets to accelerate packet signal level detection.
Precision Receive Activation- A technique by which the receiver is precision-activated only when packets are expected to arrive over the link. Thus reducing the potential interference typically seen if a receiver prematurely begins decoding.
Features:
- 10/100/1000-BASE-T
- Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI
- Active scan monitors/logs ongoing RF interference across channels (no service impact)
- Dynamic auto-optimization of channel and bandwidth use
- WPA2 + Mimosa 802.1x Client
- Supports 4 pre-configured QoS levels
Warranty:
Twelve (12) months from the date of unlock.
Overview:
Package Contains:
2x B5-Lite radios
2x J-mount mounting kits
2x Gigabit PoE power supplies
1x Tube, Silicone Dielectric Compound
Performance | |
Max Throughput | 750+ Mbps |
Low Latency | Configurable to 5ms+ |
Wireless Protocols | Auto-TDD/TDMA |
Radio | |
MIMO & Modulation | 2x2:2 MIMO OFDM up to 256 QAM |
Bandwidth* | 20/40/80 MHz channels tunable to 5 MHz increments |
Frequency Range | 4900-6000 MHz restricted by country of operation (*new* US/FCC 5600-5650 support) |
Max Output Power | 23 dBm |
Sensitivity ( MCS 0 ) | -87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz |
Antenna | |
Gain | 20 dBi |
Beamwidth ( 3dB ) | 14° (azimuth and elevation) |
Cross-Polar Isolation | >20 dB |
Polarization | Dual 45° slant polarization |
Power | |
Max Power Consumption |
15 W |
System Power Method | 802.3at compliant |
PoE Power Supply | Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection |
Physical | |
Dimensions | Width: 153.31 mm (6.04”) Diameter: 260.33 mm (10.25”) |
Weight | 0.72 Kg (1lbs 9oz) |
Enclosure Characteristics |
Outdoor UV stabilized plastic |
Wind Survivability | 200 km/h (125 mph) |
Wind Loading | 39 kg @ 160 km/h (86 lbs @ 100 mph) |
Mounting | Single pole strap feed point integrated into plastic back plate with integrated curvature for contact with mounting poles. Azimuth and Elevation adjustability only provided via J-mount elevation adjustment and hose clamp loosened rotation on the pole. |
Akční zboží
Novinky
-
EOC
Ethernet over coax
Toto koaxové řešení je vhodné pro menší počet zákazníků ( násobky 64 ) - je levnější než naše miniCMTS Docsis 3.0 která je vhodná pro instalace do 500 modemů. Mezi vlastnosti hlavně patří propracovaý QoS ( lze nastavit třídy až na portech modemu ), vysoká odolnost vůči rušení a hlavně možný útlum až 60 dB. Zařízení dodáváme ve venkovním i vnitřním provedení.
Námi nabízené řešení je postavené na Atherosu čipu, který přes jeden headend modem dodává reálnou rychlost 300 Mb/s . Koncové modemy jsou dodávány pouze ve verzi 100 Mb/s s reálnou rychlostí 88 Mb/s.
Na fotkách vidíte zařízení s PON modulem, ale umíme vyrobit zařízení i bez něj. S více headend modemy max. 4 kusy ( pak by se jednalo o reálnou propustnost 1200 Mb/s ), nadále je možné ho osadit na přání dálkovým napájením ať přes UTP nebo po KOAXu.
Tyto a ostatní zařízení dodáváme jako komplexní stavebnici opticko – koaxiální včetně rozsáhlého managementu. Zařízení vám po domluvě můžeme odborně namontovat a proškolit vaše techniky.
( HEADEND )
(modem s Wi-Fi )
( management )
-
SW Transcoder
Přinášíme Vám unikátní řešení transcoderu jak pro IPTV a tak i pro CATV operátory. Pokud máte nutnost provozovat HLS streamy, popř. streamy transcodovat z MPEG2 do H.264, H.265 nebo opačně tak vás toto unikátní SW řešení určitě zaujme. Samozřejmostí je nutnost pro CATV operátory funkční CBR transcoding.
Trancoder nabízíme ve třech variantách, více najdete v našem eshopu.
Ukázka transodingu HD streamu do 720p a datovém toku 2,2 Mb/s
Funkce:
■ Transcoding and transrating
■ Real-time transcoding of MPEG Transport Streams
■ Single Program Transport Stream (SPTS) to Single Program Transport Stream (SPTS)
■ IP input to IP output
■ Input: MPEG Transport Stream (MPEG-TS) with MPEG-2 Video AVC / H.264 HEVC / H.265 AAC, MPEG Audio, Dolby Digital, Dolby Digital Plus
■ Output: MPEG Transport Stream (MPEG-TS) with Transcoding / transrating or passthrough MPEG-2 Video AVC / H.264 HEVC / H.265 AAC, MPEG Audio, Dolby Digital, Dolby Digital Plus
■ Video effects Deinterlacing, scaling, frame rate conversion
■ Audio effects Volume, sample rate conversion